Polyvine Heavy Duty Wood Varnish

An ultra hard, high quality, fast drying varnish with a satin or dead flat finish that dries to a crystal clear film for interior surfaces requiring a high level of protection such as working surfaces and areas of high wear.

Ideal for

• Doors
• Wooden worktops
• Tabletops
• Furniture
• Kitchen cabinets
• Wood paneling

Unique qualities

• Drying time: 30-60 minutes
• Recoat time: 1-2 hours
• Curing time: 16 hours
• Coverage: approximately 10-20 square metres per litre

Preparation

All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.

Application

Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat and allow to dry. To prime porous surfaces dilute with 10% water. Apply one or two further coats.

Caution

Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Do not apply over uncured oil based paint. When using dead flat finish, for a high level of protection and stain resistance apply 2 coats of satin then 1 coat of dead flat.

Storage

Protect from extremes of temperature during storage and application.

Health, safety and the environment

Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water. Do not empty into drains or watercourses.