Formulated to avoid unsightly overlap marks, giving an even, lustrous finish. Polyvine Wood Dyes for interior or exterior use, are intermixable giving a limitless range of possibilities to colour and enrich the wood.
Ideal for
- Hardwood
- Softwood
- Interior
- Exterior
Unique qualities
- Drying time: 1-2 hours depending on temperature
- Coverage: approximately 10-20 square metres per litre
Preparation
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils and resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Application
Ensure product is well mixed. Pour into a suitable container and mix with other colour if required. Apply generously with a good quality brush, working with the grain and keeping a wet edge. Wipe off any excess quickly to get an even finish.
Caution
Different woods and woodgrains will alter the appearance of the wood dye. Apply to a test area prior to application. Polyvine Wood Dye seals the surface but for added protection apply Polyvine Heavy Duty Wood Varnish, Polyvine Heavy Duty Floor Varnish, dead flat or satin, or Polyvine Exterior Varnish.
Storage
Protect from extremes of temperature during storage and application.
Health, safety and the environment
Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water. Do not empty into drains or watercourses.