The only one hour working time glaze. Mix with emulsion.
An acrylic glaze which when coloured with satin or matt emulsion/latex can be used to produce semi transparent coloured paint effects. For water and wear resistance, allow a minimum of 48 hours before protecting with Polyvine Decorators Varnish (gloss, satin or dead flat). Test on a small area of the effect before application.
Ideal for
- Colourwashing
- Stippling
- Ragging/bagging
- Dragging
- Sponging
Unique qualities
- One hour working time
- Interior use
- Dries to a translucent finish
- Wash brushes and tools in water
At a glance
- Drying time: Base coat - minimum 24 hours. Top coat - minimum 48 hours
- Coverage: 10-20 square metres per litre when mixed with emulsion
Application and advice
Application
Select base coat colour in vinyl silk emulsion/satin latex. Apply base coat and allow to dry for a minimum of 24 hours with ventilation. Colour your Classic Colour with satin or matt emulsion. In warm conditions, above 21°c/70°f or in low humidity mix 6 parts Classic Colour to 1 part emulsion. In cold conditions, below 21°c/70°f or in high humidity mix 4 parts to 1 part emulsion. Brush or roller the coloured glaze liberally over the base coat. Create the desired decorative effect by breaking the surface with a crumpled rag, bag, sponge or a Polyvine tool or brush.
Caution
Always test adhesion and the application of the effect on a trial area before starting.
Storage
Protect from extremes of temperature during storage and application.
Health, safety and the environment
Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water. Do not empty into drains or watercourses.
