The strongest of all ‘one pack’ varnishes that dries in minutes and cures in 16 hours to protect interior and exterior surfaces.
New water-based crosslinked polyurethane with advanced resin technology brings the highest protection single pack ever developed. For the ultimate protection of interior and exterior surfaces to an industrial level of finish. UV blocking and absorption reduce greying, aging and deterioration of surfaces. Biocides protect against mildew, mould and fungus.
Ideal for
- Wood
- Marine
- Worktops
- Doors
- Furniture
- Concrete paving
- Unglazed tiles
- Slate
- Brick
Unique qualities
- Dries very fast
- Cures in 16 hours
- High water resistance
- Industrial level of finish
- High resistance to chemicals alcohol and stains
At a glance
- Drying time: 30-60 minutes
- Recoat time: 1-2 hours
- During time: Allow 48 hours before heavy use
- Coverage: 10-20 square metres per litre
Application and advice
Preparation
Remove all traces of old finishes, dirt, oil, wax and grease. These may have impregnated the surface and can cause failure. Sand in direction of the grain to provide a key. Thoroughly clean after sanding. Instructions in the technical data sheet must be followed. Ensure the product is well mixed but do not shake.
Application
Apply 2 to 3 coats of varnish, with a good quality brush. On new softwood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain. For a dead flat finish with high durability and stain resistance, apply two coats of satin followed by one of dead flat.
Caution
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Do not apply over uncured oil paints.
Storage
Protect from extremes of temperature during storage and application.
Health, safety and the environment
Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water. Do not empty excess into drains or watercourses.
